features rohs compliant* low capacitance - 0.5 pf esd protection >15 kv applications hdmi 1.4 digital visual interface (dvi) usb 3.0 / usb otg memory protection sim card ports absolute maximum ratings (@ t a = 25 ? unless otherwise noted) CDDFN10-0524P - surface mount tvs diode array *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. parameter symbol CDDFN10-0524P unit peak pulse power (t p = 8/20 s) p pp 30 w peak pulse current (t p = 8/20 s) i pp 3.8 a operating voltage (i/o pin - gnd) v dc 6v storage temperature t stg -55 to +150 ? operating temperature t opr -55 to +85 ? general information the CDDFN10-0524P device provides esd, eft and surge protection for high- speed data ports meeting iec 61000-4-2 (esd) requirements. the transient voltage suppressor array, protecting up to 4 data lines, offers a working peak reverse voltage of 5 v and minimum breakdown voltage of 6 v. the dfn10 packaged device will mount directly onto the industry standard dfn10 footprint. bourns chip diodes conform to jedec standards, are easy to handle with standard pick and place equipment and their at con guration minimizes roll away. pins 3, 8 pin 1 pin 2 pin 4 pin 5 electrical characteristics (@ t a = 25 ? unless otherwise noted) parameter symbol min. typ. max. unit breakdown voltage @ 1 ma v br 6v reverse standoff voltage v rwm 5v forward voltage if =15 ma (gnd to i/o pin) v f 0.9 1.1 v channel leakage current v rwm = 5 v, (i/o pin to gnd) i d 1.5 a clamping voltage iec 61000-4-2 +6 kv, contact mode (i/o pin to gnd) v c 12 v channel input capacitance vpin3,8=0 v, vin=2.5 v, f=1 mhz (i/o pin to gnd) c in 0.5 0.65 pf channel to channel input capacitance vpin3,8=0 v, vin=2.5 v, f=1 mhz (between i/o pins) c cross 0.04 0.08 pf esd protection per iec 6-1000-4-2 contact discharge air discharge 8 15 10 15 kv esd dynamic turn-on resistance (any i/o pin to gnd) r dynamic 0.3 eft protection per iec 61000-4-4 @ 5/50 ns 40 a surge protection per iec 61000-4-5 @ 8/20 s 3.8 a *rohs compliant
1.00 (.039) 0.2 (.008) 0.875 (.034) 1.55 (.061) 0.20 (.008) 0.675 (.027) 0.4 (.016) 0.50 (.020) speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications. CDDFN10-0524P - surface mount tvs diode array product dimensions this is a molded dfn10 package with lead free 100 % matte sn on the lead frame. it weighs approximately 7 mg and has a ammability rating of ul 94v-0. recommended footprint how to order cd dfn10 - 05 24 p common diode chip diode package dfn10 = dfn-10 package working peak reverse voltage 05 = 5 v rwm (volts) number of lines 24 = 2 ground / 4 data lines suf x p = ultra-low capacitance typical part marking CDDFN10-0524P ........................................................................524 dimensions: mm (inches) pin 1 marking 2.500 0.050 (.098 .002) 1.000 0.050 (.039 .002) 0.100 (.039) 0.100 (.039) pin 1 identification chamfer 0.400 0.050 (.016 .002) 0.05 (.002) 0.200 0.050 (.008 .002) 1.950 (.077) ref. 0.500 (.020) bsc typ. r 0.400 0.050 (.016 .002) 0.250 0.050 (.008 .002) x 45 0.152 (.006) ref. 0.000 - 0.050 (.000 - .002) 0.50 - 0.60 (0.020 - 0.024)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.0 0.0 input capacitance (pf) input voltage (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 f = 1 mhz, t = 25 c -27 -24 -21 -18 -15 -12 -9 -6 -3 0 -30 1e+8 1e+9 insertion loss (db) frequency (hz) 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.00 0.0 input capacitance (pf) input voltage (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 f = 1 mhz, t = 25 c 3 ghz: -0.92 db 4.3 ghz: -3 db -70 -60 -50 -40 -30 -20 -10 0 10 20 -80 1e+8 1e+9 analog cross talk (db) frequency (hz) 0 2 4 6 8 10 12 14 16 18 2 0 4 6 8 10 12 14 transmission line pulsing (tlp) current (a) transmission line pulsing (tlp) voltage (v) i/o to gnd v_pulse 100 ns tlp_v tlp_i + - pulse from a transmission line 1 i/o 1 to i/o-port connector to i/o-port connector to protected ic to protected ic data line data line i/o 1 10 29 38 47 56 i/o 3 data line i/o 3 i/o 4 data line i/o 4 line-1 line-2 line-3 line-4 nc nc gnd gnd nc nc i/o 2 speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications. CDDFN10-0524P - surface mount tvs diode array rating & characteristic curves typical variation c in vs v in typical variation of c io -to-io vs v in insertion loss s21 (i/o-to-gnd) analog cross talk transmission line pulsing (tlp) data lines connection
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. CDDFN10-0524P - surface mount tvs diode array packaging information ....... ....... ....... ....... ....... ....... ....... ....... pa f e t 120 d 2 d d 1 w 1 c index hole pin 1 location p 0 p 1 w b 10 pitches (min.) direction of feed 10 pitches (min.) end trailer device leader start d the product is packaged in an 8 mm x 4 mm tape and reel format per eia-481-a standard. dimensions: mm (inches) item symbol dfn-10 carrier width a 1.45 0.05 (0.057 0.002) carrier length b 2.95 0.05 (0.116 0.002) carrier depth c 0.90 0.05 (0.035 0.002) sprocket hole d 1.55 0.05 (0.061 0.002) reel outside diameter d 178 (7.008) reel inner diameter d 1 50.0 (1.969) min. feed hole diameter d 2 13.0 0.20 (0.512 0.008) sprocket hole position e 1.75 0.10 (0.069 0.004) punch hole position f 3.50 0.05 (0.138 0.002) punch hole pitch p 4.00 0.10 (0.157 0.004) sprocket hole pitch p 0 4.00 0.10 (0.157 0.004) embossment center p 1 2.00 0.05 (0.079 0.002) overall tape thickness t 0.20 0.10 (0.008 0.004) tape width w 8.00 0.20 (0.315 0.008) reel width w 1 14.4 (0.567) max. quantity per reel -- 3000 rev. 08/17/12 asia-paci c: tel: +886-2 2562-4117 fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 fax: +1-951 781-5700 www.bourns.com
|
